The ore crushing machine is a kind of mining machinery specially used to crush ore. Because the ore crushing machine is the large-scale machinery, after a long-time load operation, there must be some problems of the components of it. Here, Fote Heavy Machinery will talk about the main parts of the ore crushing machine.
The hammer crusher is a common machinery used to crush ore. In the usage process of the hammer crusher, the wear pattern of the sieve plate and the grate bars has an influence on the crushing efficiency and quality of the hammer crusher. Meanwhile, they are the quick-wear parts of the hammer crusher.
During the usage process of the hammer crusher, the material ready to be crushed should be examined seriously to prevent the other matters from coming into the crushing cavity of the hammer crusher, which can decrease the abrasion of the inner wall of the crushing cavity of the hammer crusher or its quick-wear parts and can efficiently avoid the severe abrasion of the sieve plate or the grate bars of the hammer crusher.
To some extent, the hardness and humidity of the stone material also have an influence on the abrasion pattern of the sieve plate and the grate bars of the hammer crusher. If the stone material is of high hardness, the abrasion of each part of the crushing machine will be more severe. However, in the crushing process, if the material is of high humidity, it is probable for the machine to get stuck, which will increase the abrasion of the crushing machine’s sieve plate and the grate bars.